链轨节用钢15B36Cr的开发与试制

淮钢采用90 t顶底复吹转炉-LF-RH-200 mm×200 mm连铸-连轧工艺流程试生产了2炉Φ60 mm链轨节用钢15B36Cr(/%:0.30～0.37C、0.15～0.30Si、1.20～1.50Mn、≤0.040P、≤0.0505、0.20～0.40Cr、≤0.25Ni、≤0.35Cu、≤0.06Mo、0.0005～0. 0030B)。通过加严影响淬透性化学成分,控制出钢碳≥0.08%,转炉有效挡渣和下渣检测系统控制下渣,LF炉铝粒和电石渣面脱氧,RH最低真空度处理20～30 min,结晶器电磁搅拌、末端电磁搅拌和连铸低过热度保护浇铸等工艺措施,15B36Cr钢的化学成分稳定控制在内控范围内,除了B粗以外,其他类型非金属夹杂物级别全部控制在1.0以内,淬透性控制在较窄的范围内,试制钢种关键技术指标达到客户和预期设计要求。     

Owner’s Risk Allocation and Contractor’s Role Behavior in a Project: A Parallel-mediation Model

Risk allocation decisions are of critical importance in project management. The present study proposes an explanation for how risk allocation in a contract motivates a contractor to cooperate with a project owner. Theories of risk allocation and trust were used to motivate the research. Using a survey methodology, we collected data concerning 124 construction projects in China. We found that risk allocation influenced the contractor’s role behavior through the contractor’s feeling of being trusted but not the contractor’s trust in the owner. Feeling of being trusted partially mediated the effect of risk allocation on the contractor’s in-role (i.e., contractual) behavior and fully mediated the effect on extra-role behavior. The study introduces a social and psychological view of the impacts of risk allocation to the project and engineering management literature. We contribute to theory by arguing and demonstrating the mediating effect of trust on the relationship between risk allocation and contractor behavior. From a practical standpoint, we conclude that contractual risk allocation has a significant impact on building a trusting relationship between owners and contractors and that contractors who feel trusted perform both contractually mandated actions and actions external to the contract more diligently, resulting in the likelihood of improved outcomes for both parties.     

苏6井区下石盒子组高分辨率层序地层学特征

以高分辨率层序地层学理论和技术方法为指导，在苏里格气田苏6井区地表露头、钻井岩心、测井、地震资料综合研究的基础上，通过基准面旋回结构、叠加样式的沉积动力学分析，将该井区下石盒子组划分为2个长期、5个中期和14个短期旋回层序；并较为详细地讨论了各期旋回层序特征；建立了以长期旋回层序界面和最大洪泛面为等时年代地层框架，以中期旋回层序为等时地层单元的高分辨率层序地层格架；通过分析，认为下石盒子组盒₈下段天然气储、盖条件最为有利；有利于储层发育的河道砂体主要出现在长、中期上升半旋回的中、下部，层序界面上相当短期旋回级别的单河道砂体是下石盒子组天然气勘探开发的主要目标。     

水泥浆失水制约下套管与井眼间隙的研究

通过对水泥浆失水规律的室内试验分析以厦对注水泥顶替过程中水泥浆失水桥堵套管与井眼间隙问题的研究，建立了顶替过程中滤失层不发生水泥浆失水而桥堵环形空间的临界失水量计算模型，提出了调配水泥浆失水性能和确定合理套管井眼间隙的具体方法，对注水泥现场施工和井身结构设计具有一定的指导意义。     

Colloidal Synthesis of Hollow Cobalt Sulfide Nanocrystals

Formation of cobalt sulfide hollow nanocrystals through a mechanism similar to the Kirkendall Effect has been investigated in detail. It is found that performing the reaction at > 120 °C leads to fast formation of a single void inside each shell, whereas at room temperature multiple voids are formed within each shell, which can be attributed to strongly temperature‐dependent diffusivities for vacancies. The void formation process is dominated by outward diffusion of cobalt cations; still, the occurrence of significant inward transport of sulfur anions can be inferred as the final voids are smaller in diameter than the original cobalt nanocrystals. Comparison of volume distributions for initial and final nanostructures indicates excess apparent volume in shells, implying significant porosity and/or a defective structure. Indirect evidence for fracture of shells during growth at lower temperatures was observed in shell‐size statistics and transmission electron microscopy images of as‐grown shells. An idealized model of the diffusional process imposes two minimal requirements on material parameters for shell growth to be obtainable within a specific synthetic system.     

3G与WLAN互连的安全协议和分析

随着无线互联网的发展,第3代移动通信系统(3G)与无线局域网(WLAN)的互连也成为研究的热点。3G系统的优势在于计费管理、漫游与安全性,WLAN系统的优势在于高带宽和低投资成本。通过3G与WLAN的互连可以实现优势互补。论文介绍了3G与WLAN互连的体系和安全结构,综述了互连的安全协议,分析了互连面临的安全挑战,并指出了现有的安全机制所存在的不足,探讨了下一步研究的方向。     

Optimal Block Design for Asynchronous Wake-Up Schedules and Its Applications in Multihop Wireless Networks

In this paper, we consider the problem of designing optimal asynchronous wake-up schedules to facilitate distributed power management and neighbor discovery in multihop wireless networks. We first formulate it as a block design problem and derive the fundamental trade-offs between wake-up latency and the average duty cycle of a node. After the theoretical foundation is laid, we then devise a neighbor discovery and schedule bookkeeping protocol that can operate on the optimal wake-up schedule derived. To demonstrate the usefulness of asynchronous wake-up, we investigate the efficiency of neighbor discovery and the application of on-demand power management, which overlays a desirable communication schedule over the wake-up schedule mandated by the asynchronous wake-up mechanism. Simulation studies demonstrate that the proposed asynchronous wake-up protocol has short discovery time which scales with the density of the network; it can accommodate various traffic characteristics and loads to achieve an energy savings that can be as high as 70 percent, while the packet delivery ratio is comparable to that without power management.     

Synthesis of amphiphilic magnetic microspheres by dispersion copolymerization of styrene and poly(ethylene oxide) macromonomer

Amphiphilic magnetic microspheres ranging in diameter from 5 to 100 µm were prepared by dispersion copolymerization of styrene and poly(ethylene oxide) vinylbenzyl (PEO‐VB) macromonomer (MPEO) in the presence of Fe₃O₄ magnetic fluid. The effects of various polymerization parameters on the average particle size were systematically investigated. The average particle size was found to increase with increasing styrene concentration and initiator concentration. It also increased with decreasing stabilizer concentration and molecular weight of MPEO. The content of the hydroxyl groups localized in the microspheres ranged from 0.01 to 0.2 mmol g^?1. © 2003 Society of Chemical Industry     

微波辅助合成3,4-二氨基苯甲酸

以对氨基苯甲酸为原料,在微波辐射下经乙酰化、硝化、水解及还原反应制得3,4-二氨基苯甲酸(Ⅰ),总收率为67．6%(未用微波辐射时为40．7%),反应时间由6 h缩短为1 h,并探讨了合成条件。在n(p- H2NC6H4COOH):n(Ac2O)=1:2,微波功率800 w的条件下,回流5 min,对乙酰胺基苯甲酸(Ⅱ)的收率为93．8%;n(Ⅱ):n(Ac2O)=1:2,使用过量乙酸酐,在冰水浴中滴完浓硝酸后,在微波功率800 W,回流3 min后,4-乙酰氨基-3-硝基苯甲酸(Ⅲ)的收率为85．3%;在微波功率800 W条件下,Ⅲ与过量的w(KOH)= 50%乙醇溶液,回流5 min,3-硝基-4-氨基苯甲酸(Ⅳ)的收率为93．1%;在Ⅳ的乙醇溶液中,在回流温度下滴加w[(NH4)2S]=9%硫化铵溶液,然后,在微波功率800 W条件下,回流5 min,可得90．8%的目标产物Ⅰ。用IR、1H NMR对化合物Ⅰ～Ⅳ进行了表征。